Tips On How To Extend Smok Pen Recharge Time
The Smok Pen is really a new pen that was created by two guys in California. They wished to develop a cool writing instrument that looked like a genuine pen but had the opportunity to smoke a hookah. They named their product the Smok Valve and the Smok Pen. The Smok Valve has taken the marketplace by storm.
The Smok Pen includes a built quality that’s just great. I came across that even though it can be an electronic pen the build quality is simply as good as the pens that I have reviewed. It is because of how they made the very best cap. You don’t have to be worried about the cap cracking or breaking on you Smok Valve Pen.
Both biggest differences that separate the Smok Valve from other pens may be the shape of the coils and just how that they are built. Generally the coil on a Smok Pen is larger than on other pens. I believe that they did this on purpose, to help make the pen feel more substantial.
If you take a look at a Smok Pen, you will observe that your body of the pen is round rather than smooth like other pens. On the back of the pen you will find a little tab that houses the coil. When you press on the tab it is simple to turn the heating element on / off. I really liked Vape Pen Battery this feature because it allows me to utilize the Smok Pen 22 whenever Personally i think like smoking.
To utilize the Smok Pen it is advisable to keep the heat button pressed. Once the button is pressed, the heating element will begin to warm up. Once it reaches the appropriate temperature it is possible to switch off the heating element. Smok recommends utilizing a 22mm tank. I prefer a larger tank, but that’s just me.
Once you put your Smok Pen into the tank you will notice a indicator light come on. The indicator light will remain green if you don’t put your Smok Pen in to the Smok Pen charger. Once your Smok Pen has entered the charger the indicator light will turn red. You should always put your pen in to the charger before you apply the e-liquids to the coil heads. Additionally it is important to do that before putting your e-liquids in to the coil heads.
After you have completed this step, it is best to check to see when you are at the right temperature for the coils to fire. Or even then you should turn the power off and try again. When you are still not satisfied with your Smok Pen i quickly suggest you take it in for some troubleshooting. This is exactly what I would call the “troubleshooting process” because sometimes things just do not work as they should. I suggest that you perform the following two steps, then go on and check the Smok Pen to see if it still has the electronic charging port.
Before you go any further you should remove the battery from your own pen and unscrew the magnetic cap. You should then remove the plastic sleeve that holds the sub-ohm. There is a wire that runs through the Smok’s body that is green in color. You should loosen this wire using pliers. Once you have loosened this wire after that you can access the sub-ohm. You should then take away the wire from the Smok’s body and carefully insert it into the Smok pen’s electrical port, being careful never to touch the coils.
After you have placed the sub-ohm tank into the pen you need to then place all of those other components including the wattage, the batteries and the heating element into the included microwaveable microwave oven. Turn on the energy and follow the on screen instructions. You need to place the pen’s battery in to the microwave and activate the setting. You need to then wait approximately 30 seconds before turning it back off. When you initially put the pen in to the microwave the electronic reading will show a minimal voltage protection setting. If this setting does not automatically get set you then should follow the on screen instructions.
After the Smok Pen has reached the temperature that it needs to reach you need to then connect the two wires to the positive and negative on the positive post on the Smok unit. You need to then connect the other end of the battery to the negative post on the negative side of the Smok unit. The ultimate step would be to connect the positive cable to underneath of the Smok’s on / off switch.
After all of the components have been placed in to the pen, you should turn the energy on. Following the first test run, you ought to be able to start to see the battery life indicator light seriously. If you don’t see any sign of life from the Smok Pen, you should take away the battery from the pen and then replace it with a fresh one. For your convenience gleam green light which might be pressed so that you can confirm the battery charging status. If you have done these things and you also do not see the green light indicating charging, you need to replace the battery.